TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
The Smok Pen is a new pen that was developed by two guys in California. They wished to develop a cool writing instrument that looked like a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has had the market by storm.
The Smok Pen has a built quality that’s just great. I came across that even though it is an electronic pen the build quality is simply as good as any of the pens that I have reviewed. For the reason that of how they made the very best cap. You don’t need to worry about the cap cracking or breaking on you Smok Valve Pen.
Both biggest differences that separate the Smok Valve from other pens may be the shape of the coils and the way that they are built. In general the coil on a Smok Pen is larger than on other pens. I think that they did this deliberately, to help make the pen feel more substantial.
vapinger.com Invest the a look at a Smok Pen, you will notice that your body of the pen is round rather than smooth like other pens. On the back of the pen there exists a little tab that houses the coil. Once you press on the tab you can easily turn the heating element on and off. I really liked this feature because it allows me to use the Smok Pen 22 whenever Personally i think like smoking.
To utilize the Smok Pen it is advisable to keep the heat button pressed. After the button is pressed, the heating element will start to warm up. Once it gets to the appropriate temperature it is possible to switch off the heating element. Smok recommends utilizing a 22mm tank. I prefer a more substantial tank, but that’s just me.
Once you put your Smok Pen into the tank you will notice a indicator light seriously. The indicator light will remain green if you don’t put your Smok Pen in to the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen in to the charger before you apply the e-liquids to the coil heads. It is also important to do this before putting your e-liquids in to the coil heads.
After you have completed this step, you should always check to see if you are at the proper temperature for the coils to fire. If not then you should turn the power off and try again. In case you are still not satisfied together with your Smok Pen then I suggest you take it in for some troubleshooting. This is exactly what I would call the “troubleshooting process” because sometimes things just usually do not work as they should. I would recommend that you perform the following two steps, then go ahead and check the Smok Pen to see if it still gets the electronic charging port.
Before you go any further you should take away the battery from your own pen and unscrew the magnetic cap. You should then take away the plastic sleeve that holds the sub-ohm. There is a wire that runs through the Smok’s body which is green in color. You should loosen this wire using pliers. After you have loosened this wire after that you can access the sub-ohm. You should then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
Once you have placed the sub-ohm tank into the pen you should then place all of those other components like the wattage, the batteries and the heating element into the included microwaveable microwave oven. Start the power and follow the on screen instructions. You should place the pen’s battery in to the microwave and activate the setting. You need to then wait approximately 30 seconds before turning it back off. When you initially put the pen into the microwave the electronic reading will show a minimal voltage protection setting. If this setting does not automatically get set then you should follow the on screen instructions.
Once the Smok Pen has reached the temperature that it requires to reach you need to then connect the two wires to the negative and positive on the positive post on the Smok unit. You should then connect the other end of the battery to the negative post on the negative side of the Smok unit. The final step would be to connect the positive cable to the bottom of the Smok’s on / off switch.
After all the components have been placed into the pen, you should turn the power on. Following the first test run, you need to be able to start to see the battery life indicator light seriously. If you do not see any sign of life from the Smok Pen, you should take away the battery from the pen and then replace it with a brand new one. For your convenience there is also a green light which might be pressed so that you can confirm the battery charging status. If you have done these things and you do not start to see the green light indicating charging, you should replace the battery.